Li-Battery Charger IC

___Power Management-Li-Battery Charger IC___

___Part No.___ ______ (勾選方式)	___Features___	___Vcc(V)___ ______ (勾選方式)	___IBAT(mA)___ ______ (勾選方式)	___ICC(uA)___ ______ (勾選方式)	___Package___ ______ (勾選方式)
___UB2012___	___Advanced Linear Charge Management IC for Single and Two-cell Lithium-Ion and Lithium-Polymer___ ___A：4.1V B：4.2V C：8.2V D：8.4V___ ______ ___* Ideal for Single 4.1V,4.2V and Dual-Cell 8.2V,8.4V Li-Ion or Li-Pol Packs___ ___* 0.3V Dropout Voltage for Minimizing Heat Dissipation___ ___* Better than ±1.2% Accuracy of Voltage Regulation With Preset Voltages___ ___* Dynamic Compensation of Battery Pack’s Internal Impedance to short Charging Time___ ___* Optional Cell-Temperature Monitoring___ ___* Integrated Voltage and Current Regulation With Programmable Charge-Current___ ___* Integrated Cell Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Charge Stage___ ___* Charge Status Output for Single or Dual Led or Host Processor Interface___ ___* Automatic Battery-Recharge Feature___ ___* Charge Termination by Minimum Current___ ___* Automatic Low-Power Sleep Mode When VCC is Removed___ ___* EVMs Available for Quick Evaluation___	___4.5~12.0___	___-___	___7000___	___DIP-8___ ___SOP-8___ ___TSSOP-8___
___UB2016___	___Charger Management IC For Single Li or Li-Polymer___ ___Battery with fixed 4.2V; OTP and trickle charge___ ______ ___* Programmable Charge Current Up to 500mA.___ ___* No External MOSFET, Sense Resistor or Blocking Diode Required.___ ___* Complete linear charger in ThinSOT Package for Single Cell / Coin Cell Lithium-lon Batteries.___ ___* Constant Current / Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating.___ ___* Charges Single Cell Li-lon Batteries Directly form USB Port.___ ___* Preset 4.2V Charge Voltage with High Accuracy about ±1.2%.___ ___* Automatic Recharge.___ ___* 2.9V Trickle Charge Threshold.___ ___* 20μA Supply Current in Shutdown Mode.___ ___* Charge Status Output Pin.___	___4.5~6___	___500___	___2000___	___SOT-25___
___UB2017___	___Charger Management IC For Single Li or Li-Polymer___ ___Battery with fixed 4.2V; OTP___ ______ ___* Programmable Charge Current Up to 500mA.___ ___* No External MOSFET, Sense Resistor or Blocking Diode Required.___ ___* Complete linear charger in Thin SOT Package for Single Cell / Coin Cell Lithium-lon Batteries.___ ___* Constant Current / Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating.___ ___* Charges Single Cell Li-lon Batteries Directly form USB Port.___ ___* Preset 4.2V Charge Voltage with High Accuracy about ±1.2%.___ ___* Automatic Recharge.___ ___* 2.9V Trickle Charge Threshold.___ ___* 25μA Max Supply Current in Shutdown Mode.___ ___* Charge Status Output Pin.___	___4.5~6___	___500___	___2000___	___SOT-26___
___UB6054___	___Charger Management IC For Single Li or Li-Polymer___ ___Battery with fixed 4.2V; OTP and trickle charge___ ______ ___* Programmable Charge Current Up to 500mA.___ ___* No External MOSFET, Sense Resistor or Blocking Diode Required.___ ___* Complete linear charger in ThinSOT Package for Single Cell / Coin Cell Lithium-lon Batteries.___ ___* Constant Current / Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating.___ ___* Charges Single Cell Li-lon Batteries Directly form USB Port.___ ___* Preset 4.2V Charge Voltage with High Accuracy about ±1.2%.___ ___* Automatic Recharge.___ ___* 2.9V Trickle Charge Threshold.___ ___* 20μA Supply Current in Shutdown Mode.___ ___* Available in a SOT-25 Pacakage.___ ___* Charge Status Output Pin.___	___4.5~6___	___500___	___2000___	___SOT-25___
___UB6054A___	___Charger Management IC For Single Li or Li-Polymer___ ___Battery with fixed 4.2V; OTP___ ______ ___* Programmable Charge Current Up to 500mA.___ ___* No External MOSFET, Sense Resistor or Blocking Diode Required.___ ___* Complete linear charger in ThinSOT Package for Single Cell / Coin Cell Lithium-lon Batteries.___ ___* Constant Current / Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating.___ ___* Charges Single Cell Li-lon Batteries Directly form USB Port.___ ___* Preset 4.2V Charge Voltage with High Accuracy about ±1.2%.___ ___* Automatic Recharge.___ ___* 2.9V Trickle Charge Threshold.___ ___* 20μA Supply Current in Shutdown Mode.___ ___* Charge Status Output Pin.___	___4.5~6___	___500___	___2000___	___SOT-26___
___UB10803___	___Charger Management IC For Single Li or Li-Polymer___ ___Battery with fixed 4.2V; OTP and Dual LED drivers___ ______ ___* A Constant-Current/Constant-Voltage Linear Charger for Single-Cell Li-ion/Polymer Batteries___ ___* Integrated Pass Element and Current Sensor___ ___* Highly-Integrated, Requiring No External FETs or Blocking Diode___ ___* 4.2V Voltage Accuracy: ±1.2% All Temperatures (Available with 4.10V and 4.36V options upon request)___ ___* Programmable Charge Current 50mA to 500mA___ ___* Programmable End-Of-Charge Current by Current Recharge Algorithm___ ___* Pre-Charge for Fully Discharged Batteries___ ___* 1μA (Typ.) Leakage Current of the Battery when No Input Power is Attached or Charger is Disabled___ ___* Power Present and Charge Status Indications___ ___* Thermal Regulation on Charging Current to Prevent Over-Heat___ ___* Few Components, Cost-Effective Solutions___	___4.5~6.0___	___500___	___1000___	___HSOP-8___ ___DFN2030-8___
___UB2011___	___ADVANCED LINEAR AND SWITCH MODE CHARGE MANAGEMENT IC FOR LITHIUM-ION AND LITHIUM-POLYMER___ ______ ___* Ideal for 1-4 Series Circuit Cell Li-Ion or Li-Pol Packs___ ___* High Accuracy of Voltage Regulation With Preset Voltages___ ___* Optional Cell-Temperature Monitoring___ ___* Current Regulation With Programmable Charge-Current___ ___* Charge Termination by Minimum Current___ ___* With Short-Circuit Protection___ ___* With Thermal Protection___ ___* Charge Status Output Pin___ ___* Available for Linear and Switch-Mode charging___	___3~7___	___-___	___350___	___SOP-8___
___UC34363___	___Constant Voltage And Constant Current Controller For Battery Chargers___ ______ ___* CV/CC linear charge___ ___* 3A maximum charge current___ ___* PWM control Mode___ ___* Available charge current___ ___* Over Voltage protect ,Over Current Protect___ ___* Enable Control function___ ___* Very Low Power Dissipation in Standby Mode___	___8~30___	___-___	___15000___	___SOP-8___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."