RS-485 & RS-422 Transceiver

___INTERFACE > RS-485 & RS-422 Transceiver___

___Part No.___ ______ (勾選方式)	___Features___	___Vcc(V)___	___Duplex___ ______ (勾選方式)	___DATA___ ___RATE___ ___(Mbps)___ ______ (勾選方式)	___Number of nodes___ ______ (勾選方式)	___Package___ ______ (勾選方式)
___UTRS458___	___POLARITY FREE, FAIL-SAFE 500KBPS, RS-485 / RS-422 TRANSCEIVERS WITH ±12KV ESD-PROTECTED___ ______ ___* Meet the requirements of the EIA/TIA-485 standards.___ ___* 5.0V single power supply.___ ___* 1μA low-current shutdown mode.___ ___* HBM ±12kV ESD protection.___ ___* True fail-safe receiver while maintaining EIA/TIA-485___ ___compatibility.___ ___* Hot-swap glitch free protection on control inputs.___ ___* Up to 256 transceivers on the bus.___ ___* Maximum baud rate up to 500Kbps.___ ___* Transmitter short circuit current limit.___ ___* Thermal shutdown for overload protection.___ ___* Polarity-Free for RS485 bus pins.___	___5___	___Half___	___0.5___	___256___	___SOP-8___
___UTRS485___	___FAIL-SAFE,1.0Mbps, RS-485 / RS-422 TRANSCEIVERS WITH ±12KV ESD-PROTECTED___ ______ ___* Meet the requirements of the EIA/TIA-485 standards.___ ___* 5.0V single power supply.___ ___* True fail-safe receiver while maintaining EIA/TIA-485 compatibility.___ ___* Hot-Swap glitch free protection on control inputs.___ ___* Up to 32 transceivers on the bus.___ ___* Driver short circuit current limit.___ ___* Thermal shutdown for overload protection.___	___5___	___Half___	___4.5___	___32___	___DIP-8___ ___SOP-8___
___UTRS3080___	___FAIL-SAFE, 500KBPS, RS-485 / RS-422 TRANSCEIVERS WITH ±12KV ESD-PROTECTED___ ______ ___* True fail-safe receiver while maintaining EIA/TIA-485 compatibility___ ___* Enhanced slew-rate limiting facilitates Error-Free data transmission___ ___* 5.0V single power supply___ ___* 1μA low-current shutdown mode___ ___* Allow up to 256 transceivers on the Bus___ ___* HBM ±12kV ESD-protected.___ ___* Driver short circuit current limit___ ___* Thermal shutdown for overload protection___	___5___	___Full___	___0.5___	___256___	___SOP-14___
___UTRS3082___	___FAIL-SAFE, 115KBPS, RS-485 / RS-422 TRANSCEIVERS WITH ±12KV ESD-PROTECTED___ ______ ___* Meet the requirements of the EIA/TIA-485 standards.___ ___* 5.0V single power supply.___ ___* 1μA low-current shutdown mode.___ ___* HBM ±12kV ESD protection.___ ___* True fail-safe receiver while maintaining EIA/TIA-485 compatibility.___ ___* Hot-swap glitch free protection on control inputs.___ ___* Up to 256 transceivers on the bus.___ ___* Maximum baud rate up to 115Kbps.___ ___* Transmitter short circuit current limit.___ ___* Thermal shutdown for overload protection.___	___5___	___Half___	___0.15___	___256___	___SOP-8___
___UTRS3085___	___FAIL-SAFE, 2.5MBPS, RS-485 / RS-422 TRANSCEIVERS WITH ±12KV ESD-PROTECTED___ ______ ___* True fail-safe receiver while maintaining EIA/TIA-485 compatibility.___ ___* Enhanced slew-rate limiting facilitates Error-Free data transmission.___ ___* 5.0V single power supply.___ ___* 1μA low-current shutdown mode.___ ___* Allow up to 256 transceivers on the Bus.___ ___* HBM ±12kV ESD-protected.___ ___* Driver short circuit current limit.___ ___* Thermal shutdown for overload protection.___	___5___	___Half___	___2.5___	___256___	___DIP-8___ ___SOP-8___
___UTRS3088___	___FAIL-SAFE, 1.0MBPS, RS-485 / RS-422 TRANSCEIVERS WITH ±15KV ESD-PROTECTED___ ______ ___* Meet the requirements of the EIA/TIA-485 standards.___ ___* 5.0V single power supply.___ ___* 1μA low-current shutdown mode.___ ___* HBM ±15kV ESD protection.___ ___* True fail-safe receiver while maintaining EIA/TIA-485 compatibility.___ ___* Hot-Swap glitch free protection on control inputs.___ ___* Up to 256 transceivers on the bus.___ ___* Maximum baud rate up to 1.0Mbps.___ ___* Transmitter short circuit current limit.___ ___* Thermal shutdown for overload protection.___	___5___	___Half___	___1.0___	___256___	___SOP-8___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."